These High Profile P.O.I® (Precision Optics Interface) Rings Have a 33mm Centre Height to Fit Optics with a 1" Tube, and up to a 65mm Outer Objective.

The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings:

1. Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction
   
2. Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold 
   
3. Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
   

Specifications:

2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width

Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms

Machined from 6061-T6 Aluminium Alloy and 4605 Steel with Matte Black Hard Coat Anodize

UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size

Manufacturer's Note:  Leapers Inc. recommends to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.